Gauge

• 24 gauge (standard)
• 22 gauge

Length

• Maximum 50' (standard), other lengths are available as special requests

Dimensions

• 16" (standard) or 12" wide by 2" high

Finish

• Galvalume Plus®
• Signature® 200 Colors
• Signature® 300 Colors

Limitations

Recommended for roof slopes of ½:12 or greater. Oil canning is not a reason for rejection.

Fasteners

• A choice of concealed fastening clips is available for this panel system including UL® rated clips. These clips hold the panel firmly in place without unsightly exposed fasteners. Each clip system offers the ability to accommodate thermal movement.

Usage

• This panel is a structural panel that spans up to five feet on purlins, or can be used as an architectural panel over solid deck. This flat panel is designed with striations as an option to minimize oil-canning. It is designed to meet the ever-changing specifications and other industry codes.

Attributes

1. Factory applied mastic inside of female leg of panel is standard
2. Swaged end laps
3. Heavier gauges, striation and embossing (optional)
4. Roof runs without end lap panels may be erected from either direction
5. Roof to wall transition
6. 80% less exposed fasteners than traditional side lap panels and all-fasteners are long life
7. The side lap has been tested for air infiltration and water penetration under ASTM E283 and E331 methods
8. Vertical Leg
9. Insulated with thermal blocks
10. High or low floating clips available
11. High or low fixed clips available
12. Panel available in Signature® 300 and Signature® 200 Colors
13. UL® 90
14. Panel has striations

Advantages

1. Insures watertightness and easier erection
2. Improves erection and enhances watertightness
3. Minimizes oil canning
4. Flexible and convenient erection
5. Creates a trimless eave
6. Increases weathertightness and improves appearance
7. Minimizes air infiltration and water penetration and enhances acceptability among specifiers
8. Better transition to hip, valleys, and roof openings
9. High energy efficiency system
10. Allows roof to expand and contract maximizing weathertightness
11. Provides of varying insulation thickness
12. 25 year finish warranty
13. Reduces insurance costs
14. Helps with oil canning

BattenLok HS® HS Panel 16" - Section Properties

			NEGATIVE BENDING			POSITIVE BENDING
Panel Gauge	FY (KSI)	WEIGHT (PSF)	Ixe (IN.4/FT.)	Sxe (IN.3/FT.)	Maxo (KIP-IN.)	Ixe (IN.4/FT.)	Sxe (IN.3/FT.)	Maxo (KIP-IN.)
24	50	1.29	0.0644	0.0578	1.7294	0.1517	0.0926	2.7736
22	50	1.65	0.0902	0.0932	2.4923	0.2033	0.1248	3.7370

Properties Notes:

1. All calculations for the properties of BattenLok HS® panels are calculated in accordance with the 2001 edition of the North American Specification For Design Of Cold-Formed Steel Structural Members.
2. Ixe is for deflection determination.
3. Sxe is for bending.
4. Maxo is allowable bending moment.
5. All values are for one foot of panel width.

Allowable Uniform Loads
In Pounds Per Square Foot - 16" Panels

24 Gauge (Fy = 50 Ksi)
SPAN TYPE	LOAD TYPE	SPAN IN FEET
		2.5	3.0	3.5	4.0	4.5	5.0	5.5
SINGlE	LIVE	162.0	135.0	115.7	101.3	90.0	74.0	61.1
2-SPAN	LIVE	162.0	128.1	94.1	72.1	56.9	46.1	38.1
3-SPAN	LIVE	162.0	135.0	115.7	90.1	71.2	57.6	47.6
4-SPAN	LIVE	162.0	135.0	109.8	84.1	66.5	53.8	44.5
22 Gauge (Fy = 50 Ksi )
SPAN TYPE	LOAD TYPE	SPAN IN FEET
		2.5	3.0	3.5	4.0	4.5	5.0	5.5
SINGlE	LIVE	233.4	194.5	166.7	145.9	123.0	99.7	82.4
2-SPAN	LIVE	233.4	184.6	135.6	103.8	82.1	66.5	54.9
3-SPAN	LIVE	233.4	194.5	166.7	129.8	102.6	83.1	68.7
4-SPAN	LIVE	233.4	194.5	158.3	121.2	95.8	77.6	64.1

Note: For 12" panel information please contact Star.

Allowable Uniform Loads Notes:

1. Allowable loads are based on uniform span lengths and Fy = 50 ksi.
2. LIVE LOAD is limited by bending, shear, combined shear and bending and web crippling.
3. Allowable loads consider a maximum deflection ratio of L/180.
4. The weight of the panel has not been deducted from the allowable loads.
5. THE ALLOWABLE UNIFORM LOADS ARE NOT FOR USE WHEN DESIGNING PANELS TO RESIST WIND UPLIFT.
6. Please contact manufacturer or manufacturer's website for most current allowable wind uplift loads.
7. The use of any field seaming machine other than that provided by the manufacturer may damage the panels, void all warranties and will void all engineering data.

The engineering data contained herein is for the expressed use of customers and design professionals. Along with this data, it is recommended that the design professional have a copy of the most current version of the North American Specification for the Design of Cold-Formed Steel Structural Members published by the American Iron and Steel Institute to facilitate design. This Specification contains the design criteria for cold-formed steel components. Along with the Specification, the designer should reference the most current building code applicable to the project jobsite in order to determine environmental loads. If fur ther information or guidance regarding cold-formed design practices is desired, please contact the manufacturer.

EFFECTIVE NOVEMBER 3, 2004
SUBJECT TO CHANGE WITHOUT NOTICE

BattenLok HS® is a registered trademark of the NCI Group.
Galvalume Plus® is a registered trademark of BIEC International, Inc.
Signature® is a registered trademark of the NCI Group.